Al Fakher HyperMax Prime 50K: pod and coil compatibility explained
The Al Fakher 50K kit is a rechargeable pod device built around what Al Fakher calls a "Snap Dual" module system. That name refers to how the replaceable part works: rather than a separate coil that pushes into a reusable pod shell, each snap-on pod arrives with its mesh coil already built in. This guide sets out exactly what that means for compatibility, where the pod's e-liquid capacity sits against UK limits, and how the whole design compares structurally to the closed and open pod systems covered elsewhere on this site.
What "Snap Dual" actually means
On an open pod system, the pod or tank is a reusable shell and the coil is a separate part you push or screw in, replaced on its own every one to three weeks or so. The HyperMax Prime 50K doesn't work that way. Its Snap Dual pod is a single sealed module: the mesh coil sits inside the pod itself, manufactured and sealed as one unit, and it clicks ("snaps") into the device body via magnetic contacts. There is no separate coil to pull out and replace inside the pod. When a pod's e-liquid runs out, or the built-in coil reaches the end of its life, the entire pod is discarded and swapped for a new one, while the rechargeable body itself is kept and reused.
This is functionally the same coil-in-pod arrangement used by many closed, pre-filled pod kits, just applied to a device with refillable-style branding and a much higher rated puff count. The distinguishing feature isn't how the coil is built in, but that the battery is rechargeable rather than single-use, and the pod is bought and swapped separately rather than the whole device being thrown away.
Why the pods aren't interchangeable with other systems
Because the coil is built into the pod at manufacture, compatibility runs in one direction only: a Snap Dual pod is designed to fit the HyperMax Prime 50K's specific magnetic contact layout and pod bay dimensions, and nothing else. It won't click into another brand's pod bay, and another brand's closed pod won't fit this device either, even where the general shape looks similar. This is the same brand-specific fitting logic that applies across pod vaping generally, covered in more depth in our guide to checking pod and coil compatibility before you buy. In practice this means the only replacement part to shop for is the pod itself, sold specifically for this device, rather than a coil and a pod bought as two separate line items.
Spec summary
| Spec | Detail |
|---|---|
| Device type | Rechargeable pod kit, Snap Dual sealed pod module |
| Battery | 1000mAh built-in, USB-C |
| Charge time | ~35 minutes, manufacturer-stated |
| Pod capacity | Up to 2ml (UK regulatory cap) |
| Nicotine strength | Up to 20mg/ml salts; some lower-strength freebase |
| Puff rating | Up to 50,000, manufacturer estimate across device lifetime |
| Typical kit price | Under £15 |
| Typical replacement pod price | Around £7–£8 each |
The "up to 50,000 puffs" figure is Al Fakher's own stated estimate for the device across its rechargeable body and multiple replacement pods used over its lifetime, not a figure from a single pod or something Coil & Cloud has independently verified. Treat it as a manufacturer target rather than a confirmed number. The kit has drawn attention from UK vape reviewers since launch, though we haven't tested it ourselves and don't repeat or endorse any specific review score here.
E-liquid capacity within UK limits
Each Snap Dual pod holds up to 2ml of e-liquid, which sits exactly at the regulatory ceiling for a single nicotine-containing tank, pod or cartridge under the Tobacco and Related Products Regulations (TRPR), regardless of a device's stated puff rating or battery size. Kits are typically bundled with a bottle of refill e-liquid at the UK's separate 10ml cap per bottle, and nicotine salt strengths go up to the UK's 20mg/ml cap, with some lower-strength freebase flavour variants also available. None of this is unique to the HyperMax Prime 50K: it's the same 2ml/10ml/ 20mg/ml framework that applies to closed pods generally, set out in more detail in our pod reference.
How this compares to closed and open pod systems
Structurally, the HyperMax Prime 50K sits firmly on the closed side of the closed-versus-open divide we cover in our guide to replacing your coil versus replacing the whole pod. On an open system, you buy a coil (see our coil reference for the common resistance families) and refill e-liquid as two separate consumables, and the coil alone typically needs replacing every one to three weeks while the pod shell lasts much longer. On the HyperMax Prime 50K, as with any closed system, there's only one consumable to buy: the pod, which bundles a fresh coil and a fresh 2ml of e-liquid together every time. What sets it apart from many closed disposable-style devices isn't the pod mechanism itself but the rechargeable battery, which is also why it remained legal to sell in the UK after the 1 June 2025 ban on single-use disposable vapes; a device with a rechargeable battery and a replaceable pod falls outside that ban regardless of how high its puff rating is marketed.
Availability and replacement pods
Kits sold as the Al Fakher HyperMax Prime 50K are stocked by multiple established UK vape retailers, typically priced under £15 for the device plus one pod, across a wide range of fruit, menthol and mixed flavours (Blue Razz Lemonade, Lush Ice, Two Apple, Grape Mint, Peach Ice, Magic Love and Cool Mango among them, though exact ranges vary by retailer and aren't exhaustive). Once the first pod is used up, only the pod itself needs replacing, not the device body. Separately sold Al Fakher 50K pods run at around £7–£8 each, which is the ongoing running cost to budget for rather than the price of the kit itself.
Because the coil is fixed inside the pod, there's no coil resistance to check or e-liquid ratio to match beyond what's already pre-filled by Al Fakher; compatibility here is simply a matter of buying pods listed specifically for this device rather than assuming any closed pod of a similar size will click in.